[2023 Updated] 4 Best On Board Air Compressor Kits
On board compressors are quite useful for inflating Jeep, Suv, Utv, or truck tires if you do a lot of off road driving.
These onboard air compressor systems can be easily mounted on your vehicles and you can use them to supply compressed air to power all of your tools wherever you may need them. So, Here we have reviewed the top 4 best on board air compressor kits along with their features.
Here is a quick list if you are in a hurry!!
Best On Board Air Compressor Kits 2023
- ARB CKMTA12 ’12V’ On-Board Air Compressor
- VIAIR Ultra Duty Onboard Air System
- ARB CKMA12 On-Board 12V Air Compressor
- AIR LIFT 25592 Load Controller II On Board Air Compressor System
Here are detailed reviews of each on board air compressor kits.
1. ARB CKMTA12 12V On-Board Air Compressor:
This compressor by ARB is considered to be one of the best on board air compressor kit.
Its twin motor design delivers an airflow rate of 174LPM (6.16CFM) and is a 100% duty cycle.
This unit is designed for air locker activation, inflating tires, and is suitable for many air tools when it is used in conjunction with 4L air tank.
It features anodized mounting bracket which dissipates heat to keep it cool, and the
Teflon impregnated carbon fiber piston seals make it quite durable.
The hard anodized cylinder bores greatly increases its efficiency as it reduces friction.
Installation is very easy as it includes a full wiring loom and has easy plug-in connectivity to air locker control solenoids.
You don’t have to worry about water going in it as the motors are water-sealed.
Feature list:
- Dimensions: 19.7 x 10.2 x 4.7 Inches
- Air Flow Rate: 174LPM
- CFM: 6.16
- 100% Duty Cycle
- Voltage: 12 volts
- Linear Brush Preload System
- Mounting Bolts And Washers
- Teflon Impregnated Carbon Fiber Piston Seals
- Hard-Anodized Cylinder Bores
Pros:
- Thermal Protected Motors
- Easy to use
- Over-pressure safety valve
- High Quality
Cons:
- Some Of The Users Reports Of Getting A Defective Unit
2. VIAIR Ultra Duty Onboard Air System:
The next on board air compressor is by Viair.
This is a high duty on board air compressor as it features a maximum pressure of 200 PSI and it can easily inflate a tire of 37 Inch from 0-30PSI in just 7 mins.
It has a permanent magnetic motor which provides high efficiency and has a max amp draw of 20 amps and is 100% duty cycle at 100 PSI.
Furthermore, it includes all the essential components such as 2.5-gallon air tank, air tank fittings, 480C Air compressor, airline, multiple ΒΌ” NPT port, pressure switch, and a couple of other accessories.
Feature list:
- Dimensions: 26 x 13 x 9.9 Inches
- Max Pressure: 200 PSI
- Tank Size: 2.5 Gallons
- Amp Draw: 20 Amps
- Max. Duty Cycle: 100% @ 100 PSI
- 3/8″ NPT Intake Port
- Gauge Type: Single
- Motor Voltage: 12 volt
- Motor Type: Permanent Magnetic
- 1.76 CFM @ 0 PSI
Pros:
- Max Pressure Of 200 PSI
- Tank Capacity Of 2.5 Gallons
- Permanent Magnet Motor
Cons:
- Some Users Complains Of Not Getting All The Accessories Listed
3. ARB CKMA12 On-Board 12V Air Compressor:
This ARB CKMA12 model is quite lightweight as it weighs 4.5 kg and it is one of the smallest on board air compressor.
It is quite powerful as it can inflate four (35″ – 37″) tires in a single duty cycle and it takes about 2 minus to airs up a 35″ tire.
To keep it safe from dust and moisture it is sealed.
Furthermore, it features a hard-anodized cylinder bore which increases efficiency by reducing friction, has an overpressure safety valve, to keep it safe from the high temperature the motor is thermal protected and an anodized mounting bracket which dissipates motor heat.
Feature list:
- Dimensions: 12.7 x 9.2 x 5.9 Inches
- Weight: 4.5 kg (9.9lbs)
- Hard-Anodized Cylinder Bore
- Sealed For Moisture And Dust Resistance
- Over-Pressure Safety Valve
- Anodized Mounting Bracket
Pros:
- Lightweight
- Moisture/Dust Resistance
- Over-Pressure Safety Valve
- Anodized Mounting Bracket
Cons:
- Some Of The Users Reports Of Getting A Defective Unit
4. AIR LIFT 25592 Load Controller On-Board Air Compressor System:
Another unit on our list is AIR LIFT 25592.
This model is also lightweight as it weighs only 4.57 pounds.
It inflates and controls air springs on the light as well as medium-duty vehicles for maximum convenience.
It is versatile on board compressor system which makes it simple for you to adjust your air spring pressure.
For easy and fast installation all kits include Air Lift’s exclusive wiring harness.
And to prevent air spring failure it features a low-pressure sensor that automatically activates the compressor if the air spring pressure falls below the minimum safe level.
Feature list:
- Dimensions: 13.5 x 8 x 6.5 Inches
- Weight: 4.57 Pounds
- Amperage: 12
- Voltage: 12 volts
Pros:
- 5 PSI Low-Pressure Sensor
- Lightweight
- Wiring Harness For Fast And Easy Installation
- Low-Pressure Sensor
Cons:
- Installing It Might Be Difficult For You
- Most Of The Users Reports Of Getting A Defective Unit
Conclusion:
These are our top rated on board air compressor kits for you.
If you are getting confused about which one to pick all you have to do is pick the model which fulfills your needs, offers more features, and is in your budget.
And you should keep in mind that these are not suitable for heavy-duty work just like other air compressors do.
They are great for air springs, inflating tires, and other light jobs.
Related Posts: